The Puffco Peak Vaporizer is the ultimate portable smart rig. Simple controls eliminate the learning curve for beginners but still provide extensive possibilities for more experienced vapers. Every aspect of this vaporizer was painstakingly designed to create the most enjoyable session you could ever imagine.
The Puffco Peak has four temperature options ranging between 450-600°F allowing you to optimize your session for delicious flavor or impressive clouds. No matter which temperature you prefer your Puffco Peak will be up to temperature in an average of 20 seconds, compared to the several minutes' long processes of heating and cooling a traditional rig this means more enjoyment and less waiting around. Integrated software will adjust the heating time if the atomizer is still hot, reducing heating times even more, and preventing overheating when taking repeated hits.
Using the included supercharger you can achieve a full charge from a completely dead battery in about 2 hours. A full charge usually lasts an average of 30 dabs depending on your selected temperature setting. For the quickest charge always use the included supercharger plugged directly into a wall outlet, avoid using third party chargers and power strips.
A hand-blown borosilicate glass attachment will come included with your Peak. Featuring a minimalist perc design you will enjoy cool and balanced hits, instead of the strained inhalation inferior smart rigs provide. The glass can be easily removed for cleaning or storage, and can also be swapped with other glass attachments that are custom made for the Peak.
Fully charge your Peak before first use, it will pulse white until the device is fully charged. Fill the glass with water until it is just above the air wholes and take a gently pull to ensure there is no splashback, do not do this with the glass attached to the base in case you spill! Turn on your Peak by holding the button for 3 seconds, cycle temperatures by pressing the button once. Press the button twice to begin heating, some people prefer to load their concentrates before starting the heating cycle, but it can also be done while the atomizer is getting up to temperature. Place your carb cap on top of the atomizer, when your Peak is ready it will vibrate and flash 3 times to let you know to start inhaling. After each use, clean the ceramic bowl with a cotton swab for the best results.